Winterizing Electrical Switches

It is extremely important with the ever increasing cost of home heating to continuously be on guard for any points of air leakage or infiltration. Sealing these cracks and crevices achieves a few goals. First it keeps cold air out and heated air inside. Eliminating the drafts make your home feel more comfortable as well. At the same time sealing these cracks can cut off a port of entry for insects and other critters.

The Problem

Electrical boxes on outer walls are often the source of drafts especially in older homes. It is also one of the easiest to remedy for very little cost and minimal DIY skills.

Materials Needed:
- flat head screwdriver
- latex caulk
- caulk gun
- switchplate and electric out foam weatherstrip
- wash cloth
- dry cloth
- soapy water

Before starting this project turn the breaker off to the electrical outlet and test to be sure the outlet is not live. Unscrew the plate cover and remove. This is a good time to wash up the plate cover while you have it off. The area of interest for sealing is the gap around the electrical box indicated the red arrow in the left side of the picture. Brush away any loose debris then wipe the surrounding area with soapy water. Dry thoroughly. Load the caulk into the caulk gun. Seal around the entire perimeter of the electrical box (right side). Do not seal inside the electrical box. Smooth the caulk. Allow the caulk to cure according to the caulk instructions (about 12 hrs).

Winterized

These outlet weatherstrips are to be used in dry locations only and cannot be used with dimmer switches. Once the caulk is cured, punch out the die cut areas of a switchplate or electric outlet weatherstrip. Place it over the outlet. Place the switch cover on the outlet and secure with the screws. Turn the power to the outlet back on.

From outer appearances you won't notice any changes. If you check the outlet when the wind is hitting that wall you will notice the outlet is no longer drafty. If you are diligent and seal every outlet on an outside wall throughout your house you will notice this winterizing by a more comfortable house and lower home heating costs. The weatherstrip comes in a package of 10 for about $1.99. A tube of latex caulk will cost about $2 but you likely won't go through the whole tube for this project. At under $4 this project has a pay back period of under one heating season. Once completed this project will continue to provide energy savings without having to replace for a number of years depending on the lifespan of caulk you use. For example if you use a 20 year durability latex caulk as we do, you can expect this winterizing project to last for that period of time.

Garden Gnome
©2006-2009

Sealing Drafts

Winter is just around the corner so it's time to increase the draft sealing efforts. While draft sealing should be an ongoing project year round, catching any new air leaks as they appear it is the quickly approach heating season that serves as a reminder to get sealing. For those considering adding more insulation, sealing drafts must be your first step. The nice thing about sealing drafts is the effects can be felt immediately!

Caulk

Caulking is one of the most effective, low cost, DIY project you can do. Two tools are needed for applying caulk. A caulk gun is a must but this inexpensive tool (under $5) will provide many dependable years of service. A corner tool for smoothing the bead of caulk and forcing it a bit further into the crack is nice to have however, you can get the same results using your finger or popsicle stick.

Caulk should be applied to any joint where two differing surfaces meet such as wood and metal. It should also be applied to fill gaps between same materials such as wood window frame meeting wood window sill. It should not be used for filling cracks larger than ¼-inch. The key step is preparing for caulking is to remove any old caulk then clean and dry the surface. There seems to be a debate as to whether to push the caulk bead ahead verses pulling the caulk bead when applying. I say to use which ever method is comfortable for you. The important thing is the caulk filling the crack. There are different caulks for various applications so choose one that meets your needs.

By far my favourite caulk is Weathershield® 20 Year Duribility Acrylic caulk (1). This low odour caulk applies smoothly, cleans up with water, is paintable and remains flexible even in extreme cold temperatures. This multi-purpose caulk is ideal not only for giving that profession looking results when painting a room but also for stopping those drafts quickly and effectively. I like using Weathershield® 35+ Year Durability Silicone caulk in areas that may experience moisture problems. I've used it successfully to re-seal around where the window pane meets the frame which is often needed when dealing with older windows. This caulk is clear so barely noticeable but very effective. However, I really like using this caulk as a glue. A little dab works for this application. I use DAP® Polyurethane Waterproof Concrete Sealant (3) for sealing any exterior gaps, joints and cracks in the foundation. This masonry/concrete caulk is ideal for sealing around any wires or pipes entering through the foundation. Several years ago I discovered Lepage® Bulldog Grip® Draft-Stop® removable weather stripping (4). This is a temporary clear caulk that can be applied in the fall then removed in the spring making it ideal for sealing shut a leaky window during the winter. This is a good caulking solution for those who rent and for homeowners who need a quick, temporary solution until a more permanent solution can be found.

Insulating Foam

By far my most favourite draft sealant is expandable, insultating spray foam. There are two versions with one meant for around window and door frames that doesn't expand as much. Some manufactures distinguish the two by calling one high expanding and the other low expanding that cures flexible. This is by far one of the most useful products you can use in an older home. I keep a couple of cans of this sealant on hand all the time. Unlike caulk it can be used to fill gaps greater than ¼-inch while adding insulating value. When applied the foam expands to fill the entire gap. Once it is cured the foam can be trimmed, sanded and painted. If used outdoors where the foam will be exposed to sunlight it must be painted as UV will cause the cured foam to break down. The downside to this sealant is that if the crack or hole is filled too full buckling can occur so it's better to use a bit less until you get the feel of how it expands.

Unlike caulk expandable spray foam can be quite messy to work with. From personal experience it does not come out of clothes so wear old clothes when using and protect any furniture or carpeting. I also find it is better to use the entire can at once so this becomes a project where several spots that need sealing are identified and tagged with post-it notes then when I have enough spots to use a full can I go back and do all the sealing. Once the foam cures, I trim it with an old serrated knife then finish as needed. If indoors in an area where the foam will not be seen it can be left as is if desired but trimming will reveal if any gaps are present that may need a bit more foam.

Garden Gnome
©2006-2009